Troubleshooting
Problem: The Electric Switch will not consistently operate remotely using
the App or a Heating Remote / Magnetic Trigger
Solution: The Remote/Lightwave Link may be encountering interference or
may be at the edge of its reliable range of operation. First, ensure that there
are no large pieces of metal or bodies of water in the path of the transmis-
sion. If the problem persists, try moving the Controller/Link closer to the
Socket.
Problem: Electric Switches / TRVs ‘unlink’ themselves from the Thermo-
stat after linking other devices to it.
Solution: There is a limited number of devices that the Thermostat and other
LightwaveRF heating devices can link to. If this is exceeded, previously linked
devices will lose their connections. Note also that if linking several devices of
the same type, they must be ‘daisy chained’ together (see previous instruc-
tions).
To Next Page
Loading...