Ligitech Crayon User Manual

English 1
Crayon Setup Guide for Schools
PRODUCT SETUP
To start using Logitech Crayon, simply turn on and draw. No software downloads or pairing required. Here are some tips
to get started:
1. Make sure you are using an iPad (6th generation). This is the only device that is compatible with Logitech Crayon.
2. Make sure iPad is updated to iOS 11.4 or above. To check your iOS version, go to iPad Settings → General → Software.
3. Disconnect any previously connected digital pencils, such as Apple Pencil
®
, prior to using Crayon by going to iPad
Settings → Bluetooth → Select the device you want to disconnect. If you do not want to forget other digital pencils,
simply turn your Bluetooth
®
o before using Crayon.
4. Press the power button for 1 second. If the LED turns green, you’re ready to go. If LED turns red, charge Crayon
before use.
SOFTWARE UPDATES
Updating the iOS on your iPad may aect your experience with Crayon. If you notice changes in functionality, simply
follow these steps:
1. Download Logitech Crayon software update at https://support.logitech.com/product/crayon/downloads
2. Connect Logitech Crayon to laptop via lightning cable.
3. Follow the prompts to update software.
There is no limit to how many Crayons you can connect at one time. The rmware update app can update 8 devices at
a time. Every update takes about 2 minutes. To get notications about software updates, product tips, and more, visit
https://support.logitech.com/product/crayon/register
USE
• Use with hundreds of Apple Pencil compatible apps, which are downloadable in the App Store.
• Logitech Crayon is not pressure sensitive, so there is no need to press down hard on the iPad.
• Do not remove, chew, or rip o Crayon parts, such as cap or tip. Damaging Crayon in this manner will void the warranty.
HOW TO CHARGE
1. Flip open the cap.
2. Insert lightning cable.
3. Connect cable to a power adapter or computer to charge.
It takes about 30 minutes to charge Crayon from 0 to 100%.
Note: Crayon will not work while charging.

Ligitech Crayon Specifications

General

Charging	USB-C
Tilt Support	Yes
Palm Rejection	Yes
Pressure Sensitivity	No
On/Off Switch	No
Replaceable Tip	Yes
Weight	20 g
Compatibility	iPad (6th generation and later), iPad Air (3rd generation and later), iPad mini (5th generation and later), iPad Pro 12.9-inch (3rd generation and later), iPad Pro 11-inch (1st generation and later)
Connection	Bluetooth

Summary

Product Setup Guide

Device Compatibility and Preparation

Ensure you are using a compatible iPad (6th gen) updated to iOS 11.4+ and disconnect other digital pencils.

Powering On the Crayon

Press the power button for 1 second. Green LED indicates readiness; red LED means charging is needed.

Software Update Procedure

Updating Crayon Firmware

Download software from support.logitech.com, connect Crayon via lightning cable, and follow prompts.

Using the Logitech Crayon

Compatibility and Usage Tips

Use with Apple Pencil compatible apps. Crayon is not pressure sensitive; avoid chewing or ripping parts.

Charging the Crayon

Charging Instructions

Flip cap, insert lightning cable into adapter or computer. Full charge takes about 30 minutes.

LED Status Indicators

Charging and Product Identification

Charging Tips for Deployment

Ensure Crayons are charged before use; keep lightning cables available in classrooms.

Identifying Crayon Components

Diagram shows key parts: tip cover, pencil tube, power button, cap, tip, LED, and lightning port.

Replaceable Parts

Care and Storage Guidelines

Battery Preservation and Handling

Power off when not in use. Avoid carrying Crayon between iPad screen and keyboard to prevent cracks.

Protection and Cleaning

Avoid drops, keep charging port covered, clean with a damp cloth, and store in a dry place.