LiitoKala Lii-500 - User Manual

To Next Page

Liitokala Lii-500 Instruction Manual

Thanks for using our company’s products-Lii 500, which is a high-end and smart charger

with four independent charging/battery capacity detection/battery internal resistance

detection/ anti-reverse polarity/short circuit protection/over-current protection/temperature-

control protection/charging between 1.65V-2.2V/USB 5V output/battery activation without

any volt, ten major functions. And automatically monitors the battery in a timely manner when

the battery was charging and testing.

Lii-500 can be filled with a variety of different types of rechargeable cylindrical

lithium-ion batteries and AA/AAA cylindrical NI-MH battery, which widely used in charging the

battery for flashlights, power tools, instruments and apparatuses, digital

camera and other electronic products. Safe, portable and powerful, Lii-500 is your good helper when

you are at home or traveling.

Appearance diagram ：

Need help?

Do you have a question about the LiitoKala Lii-500 and is the answer not in the manual?

Summary

Details the six buttons and their functions for mode, current, and data selection.

Explains initial steps, current selection, and monitoring in CHARGE mode.

Describes the process for rapid battery capacity detection via discharge.

Details the normal battery capacity detection process involving charge/discharge cycles.

General

Discharge Current	250mA / 500mA
Slots	4
Display	LCD
Input Voltage	12V DC
Charging Current	300mA / 500mA / 700mA / 1000mA
Battery Types Supported	NiMH, NiCd, Li-ion
Output Voltage	4.2V / 1.48V
Compatible Battery Sizes	AA, AAA, 18650, 17670, 18500, 18350, 17500, 14500, 16340, 10440
USB Output	5V / 1000mA
Functions	Charge, Discharge, Test, Refresh