LiitoKala Lii-S8 - Page 2

4. Warning: rgeable battery (ni-mh-9v);
4.1
The
charger
can
only
charge
cylindrical
Lithium-lon
battery
(Li-lon-3.70V
/
3.80V),
lithium
iron
phosphate
battery
(LiFePO4-3.20V),
NIMH
/
NICD
(Ni-MH
/
NICD-1,20V)
battery,
and
prismatic
9V
NIMH
rechargeable
battery (Ni-MH-9V);
1.2 Before use, please refer to the manual carefully and pay attention to the recommended charging current of
the battery, and do not exceed the recommended charging current;
1.3
Choose
12.0V
DC
adapter,
and
the
power
supply
current
should
not
be
less
than
4.0A;
1.4
The
charger
may
be
hot
when
charging,
please
put
it
out
of
the
reach
of
children;
1.5 When you stop using, please unplug the power supply and battery;
1.6 It can only be used indoor at normal temperature;
1.7 The test data of this product is for reference only. Please refer to the professional instrument for the actual
situation.
2.Charger specifications and functions:
2.1
Adopt
DC12.0V
4.0A
(minimum)
input,
intelligent
charging
and
microcomputer
management
system
for
each channel;
2.2
The
biggest
highlight
of
this
charger
is
that
it
can
make
quick
charge
multi-channels
at
2A
current
at
the
same time and can charge 9V NIMH battery ;
2.3 There are five levels of charging current: 0.30A/0.50A/0.70A/1.00A/2.00A;
2.4 Charging current:
2.4.1
As
soon
as
the
lithium-ion
battery
(3.70V
/
3.80V)
and
LiFePO4
battery
(3.20V)
are
inserted
into
the
charger,
the
system
automatically
configures
the
current
according
to
the
internal
resistance
of
the
battery.
To change the charging current, long press the current button, and when the current value flashes, short press
the
current
button
to
select
the
charging
current
0.30A/0.50A/0.70A/1.00A/2.00A(
Note:
the
maximum
charging
current
can
be
2.0A
only
for
slot#
1/3/6/8
,
and
1.0A
for
slot#
2/4
/5/7;
the
total
charging
current
between
slots 1 and
2,
3
and
4,
5
and
6,
and
7
and
8
will
not
exceed
2A
in
total.
That
is
to
say
when
one
of
the
two
slot-group
is
charged
with
2A
current
and
then
the
other
slot
in
the
same
group
will
fall
back
to
1A
current
charging;
|
2.4.2
the
charging
current
of
NiMH
/
NiCd
battery
(1.20V)
will
be
fixed
at
0.50A
and
the
current
can
not
be
j
selected;
2.4.3
NiMH
(9.0V)
rechargeable
battery
can
be
charged
in
a
specific
place,
and
two
batteries
can
be
charged
at
the
same
time,
and
the
charging
current
of
each
battery
is
about
85mA;
}
2.5
During
charging,
LCD
can
display
battery
symbol
/
channel(CH)
and
battery
type
of
the
channel
/
charging
current(
A)
/
battery
voltage(V
)/
charging
time(h)
/
charging
capacity(mAh)/
energy
percentage%
/
battery
|
internal resistance(mQ); standby display "null", When the channel is short circuited or the battery is reversely
connected, “Err” will be displayed. When the battery is full, the data on the LCD will be saved and the display
will be 100%, and the battery symbol will not move. There will be red and green indicator lights for each slot.
The red light will be on when charging, and the green light will be on when the channel standby or fully charged(
stop charge); when the battery or channel is abnormal (short circuit / reverse connection, etc., the red light will |
be flashing with warning; |
a a