WARNING!
Read each step carefully before beginning any installation and make sure you understand
each step.
Keep children and pets away during installation.
Keep fingers away from places where they can be pinched or injured.
Tools Needed for Assembly (not supplied):
1 x star-head screwdriver
1 x flat screwdriver
1 x wrench
1 x stepladder
1 x wire stripper/pliers
1 x electrical tape
Materials
Unpacking Instructions
Unpack and inspect carefully to make sure all parts are included and not damaged (fig. 1).
Place all parts from the box on a working space in a cleared are
a
.
WARNING!
WARNING!
Do not install or use the ceiling fan if any part is damaged or missing.
To avoid possible electric shock, switch off the power supply at the main fuse or
circuit breaker box before installing, servicing or cleaning.
Switch off the power supply at the main fuse or circuit breaker box to avoid possible electric shock
(fig. 2).
Materials
Wiring, outlet box and box connectors must be of the type required by the local code. The minimum wire
should be a three-conductor (two-wire with ground) of the following sizes:
Wire Length
Wire Size (A.W.G.)
Up to 50' (15 m)
50-100' (15-30 m)
14
12
6
To Next Page
Loading...