Lillipad Revo User Manual

INSTALLATION INSTRUCTIONS
FOR BOATS WITH CROSSMEMBERS
THAT ARE 9 ½ - 24” APART
1. Mark the location of all crossmembers with masking tape.
2. Using the specifications below, determine the appropriate mount
location for your ladder and handles and mark the positions.
MOUNTING OPTIONS & SPECIFICATIONS
a. Determine the best mounting position for your ladder
and handles. When space allows, LilliPad’s preference is
position “C” (pictured below). Position “C” provides
added stability making the ladder easier to climb and
opens the deck for entry onto the boat.
POSITION “C”

Lillipad Revo Specifications

General

Brand	Lillipad
Model	Revo
Category	Boating Equipment
Language	English

Summary

Mounting Options and Specifications

Mounting Position Options

Details mounting positions A, B, and C with width and depth specifications.

Preferred Mounting Position C Explanation

Explains why position C is preferred for stability and deck access.

Ladder Installation Procedure

Mount Bracket to Extension Bracket Attachment

Securing the mount bracket to the extension bracket.

Bracket Assembly to Ladder Attachment

Attaching bracket assemblies to the ladder and pinning them.

Marking Chassis Mounting Locations

Holding brackets to chassis and marking crossmember locations.

First Bracket Installation Steps

Removing, positioning, marking, drilling, and securing the first bracket.

Second Bracket Installation Steps

Drilling, installing, and adjusting the second mount bracket.

Final Ladder Adjustment and Lubrication

Adjusting brackets for smooth sliding and applying lubricant.

Handle Installation Procedure

Handle Mounting Clearance Specifications

Details clearance requirements for side and front handle mounts.

Handle Securing Through Crossmembers

Ensures handles are secured through crossmembers or with backer plates.

Handle Installation Steps

Positioning, marking, drilling, and installing handles with screws.

J-Snap Post Installation

Ladder Release Button Connection

Connecting the ladder release button to the post.

Strap Marking and J-Snap Post Mounting

Marking strap location and installing the J-Snap Post.

Bow Mounts Installation

Bow Mount Installation Procedure

Installing bow mounts on the starboard side using similar procedures.

Bow Mount Handle Requirement

Specifies one handle on the left side for J-Snap compatibility.