Get Started
Go To
Lilumia.com/Get-Started
to
see video
instructions for use
IMPORTANT:
Please be sure to watch the instructions in full
PRIOR
to using your Lilumia device for the first time to ensure
proper use and the optimum clean!
7 Common Mistakes
(Please Read)
Refer to Brush Chart
to ensure your brushes are recommended for
use in the Lilumia device
Do Not Skip Step 2:
Step 2 (Swipe/Prep Step) is often missed and is
a quick step in making sure your brushes are clean.
Prevent Eyeshadow Brush Damage:
The tip of the brush hair for
eyeshadow brushes should only "meet" with the bottom of the
cleaning disc to prevent frayed or splayed hairs. All other brush types
such as foundation brushes etc should be "engaged" with the cleaning
disc.
Brush Engagement:
Do not smash or flatten brush hairs on
to
the
cleaning dis
c.
Use Warm Water:
Water should be warm, avoid lukewarm or cool
water for best results!
Cleanser First:
Pour 2 ounces of Lilumia Cleanser diluted with 1 ounce
of warm water evenly on the Cleaning Disc
Prior
to Loading Brushes.
Always Reshape
Brush Hairs Before Drying! This helps ensure your
brush hairs dry in the proper shape.
LED Button Legend
Device is Powered On
Wash Cycle
1st Rinse Cycle
2nd Rinse Cycle
3rd Rinse Cycle
Complete
To Next Page
Loading...