Need help?Do you have a question about the LIMIT 110 and is the answer not in the manual?
General| Resistance Range | 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ |
|---|---|
| Frequency Range | 20kHz |
| Diode Test | Yes |
| Continuity Test | Yes |
| Continuity Buzzer | Yes |
| Data Hold | Yes |
| Display Count | 2000 |
| Display | LCD |
| Power Supply | 9V battery |
| DC Voltage Range | 200mV/2V/20V/200V |
| AC Voltage Range | 200V |
| DC Current Range | 200μA/2mA/20mA/200mA/10A |
| AC Current Range | 200μA/2mA/20mA/200mA/10A |
| Capacitance Range | 20nF/200nF/2μF/20μF |
| Weight | Approx. 170g (including battery) |
Overview of the technical parameters and capabilities of the voltage tester.
Important instructions and precautions to avoid electric shock or damage.
Instructions on how to measure DC and AC voltage using the tester.
Procedure to determine if a line is live or not without measuring voltage.
Method for checking if a circuit is unbroken or has continuity.
How to identify the direction of rotation for three-phase motors.
Steps for replacing the tester's batteries when needed.
To Next Page
