Press " MICROWAVE"several times or press "MICROWAVE" once then turn " " to
select the function you want. Press "START/+30SEC./CONFIRM" to confirm the power.
Turn " " to adjust the cooking time. Press " START/+30SEC./CONFIRM" to start
cooking.
2. Microwave Cooking
Example: If you want to use 80% power to cook for 20 minutes, you can operate the
oven as the following steps.
OPERATION INSTRUCTION
When the microwave oven is electrified,the oven will display "0:00", buzzer will ring
once.
3) Press " CLOCK/PRE-SET ", the minute figures will flash.
5) Press "CLOCK/PRE-SET " to finish clock setting,":" will flash.
Note: 1) If the clock is not set, it would not function when powered.(Display "0:00")
2) During the process of clock setting, if you press " STOP/CLEAR", the
oven will go back to the previous status automatically.
4) Turn " " to adjust the minute figures, the input time should be within 0-59.
1) Press "CLOCK/PRE-SET " to select the time 12-hour or 24-hour.
2) Turn " " to adjust the hour figures, the input time should be within 0-23(24-hour)
or 1-12 (12 hour).
NOTE: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
2) Press " MICROWAVE" once again or turn " " to choose 80%, the oven will
display "P80".
1) Press " MICROWAVE " once, the oven will display "P100".
4) Turn " " to adjust the cooking time until the oven display "20:00".
(The maximum cooking time is 95 minutes.)
5) Press "START/+30SEC./CONFIRM " to start cooking.
Microwave Power Chart
Press
Power
Display
Once Twice Thrice 4 times 5 times
80%
P80
50%
P50
30%
P30
10%
P10
100%
P100
3) Press "START/+30SEC./CONFIRM " to confirm the microwave power.
1.Clock Setting
To Next Page
Loading...