Pan detection function
This prevents the coils being turned on without a pan being present, and also turns
off the coil as soon as a pan is removed. If the pan is of the wrong material for
induction equipment, the ‘no pan present’ symbol is displayed. After use, switch off
the hob via the control and do not rely on the pan detector.
Residual heat display
When the temperature of the hob top exceeds 60
o
C after removal of a pan, the ‘H’
symbol displays, indicating a hot surface. (Refer also to the error codes section).
Whilst the residual heat display is showing, leaving the appliance connected to the
power supply allows the cooling fans to continue to operate. When the ‘H’ symbol is
extinguished, switch off the power supply.
To Next Page
Loading...