Need help?Do you have a question about the Lincat Silverlink 600 GS7 and is the answer not in the manual?
General safety advice and regulatory compliance for appliance installation.
Specifications for GS4 models including dimensions, weight, and gas data.
Specifications for GS7 models including dimensions, weight, and gas data.
Key warnings, professional use, and disclaimer of liability for consequential loss.
Guidelines for cleaning the appliance, emphasizing safe methods and material use.
Installation must comply with regulations and be performed by a qualified CORGI registered gas fitter.
Details required ventilation for the installation area to ensure adequate air supply.
Guidance on appropriate mounting surfaces and safety clearances for installation.
Instructions for connecting the gas supply, including hose type and connection details.
Procedure for setting the gas supply and burner pressures for optimal operation.
Details the nominal gross heat input for different appliance models and gas types.
Step-by-step instructions for safely lighting the appliance's burners.
Procedures for safely turning off the appliance after use.
Steps required for initial cleaning and heating the appliance before cooking.
Guidance on cleaning and maintaining both steel and chromed griddle plates.
Routine checks for installation, operation, and safety during appliance servicing.
Step-by-step guide for replacing key components such as thermocouples, valves, and burners.
A list of available spare parts with their corresponding Lincat reference numbers.
Solutions for problems related to the burner not lighting or not staying lit.
Contact details for Lincat support and recommendations for authorized service agents.
Details the terms and conditions covered by the product guarantee and exclusions.
To Next Page
General