Need help?Do you have a question about the Lincoln Electric LINC FEED 33 and is the answer not in the manual?
General| Wire Feed Speed | 50 - 700 IPM |
|---|---|
| Weight | 40 lbs |
| Wire Feed Speed Range | 50 - 700 IPM |
| Output Current | 140A |
| Wire Diameter Range | 0.030" - 0.045" |
| Wire Size Range | 0.023-0.035 inches |
Proper placement and environmental considerations for machine operation and longevity.
Understanding machine duty cycle and the impact of overheating on performance.
Guidance on connecting the correct input voltage, phase, and frequency.
Instructions for connecting the gas cylinder and regulator to the machine.
Information on connecting welding torches and other output devices.
Description of main controls including EURO Socket, WFS, Voltage, and switches.
Explanation of digital displays for current/voltage and various connection ports.
Details on Torch Mode Switch, Cold Inch, Burnback, and other operational switches.
Information regarding the wire drive mechanism and spool support.
Procedure for loading wire, adjusting spool and sleeve tension.
How to adjust the pressure roll force for proper wire feeding.
Steps for connecting the torch and feeding electrode wire.
Procedure for starting a MIG/MAG welding process.
Instructions for replacing drive rolls for different wire sizes.
Regular checks on cables, connections, and general condition.
In-depth maintenance including cleaning and checks after repairs.
Information on potential electromagnetic disturbances and operational precautions.
Guidelines for minimizing electromagnetic emissions from the machine.
To Next Page