Lincoln Electric PRO-CUTTM 25 IM665 User Manual

PRO-CUT
TM
25
OPERATOR’S MANUAL
IM665
September, 2004
Safety Depends on You
Lincoln arc welding and cutting
equipment is designed and built
with safety in mind. However, your
overall safety can be increased by
proper installation ... and thought-
ful operation on your part. DO
NOT INSTALL, OPERATE OR
REPAIR THIS EQUIPMENT
WITHOUT READING THIS
MANUAL AND THE SAFETY
PRECAUTIONS CONTAINED
THROUGHOUT. And, most
importantly, think before you act
and be careful.
For use with machines having Code Number:
10661
• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
• World's Leader in Welding and Cutting Products •
Copyright © 2004 Lincoln Global Inc.

Lincoln Electric PRO-CUTTM 25 IM665 Specifications

General

Input Frequency	50/60 Hz
Rated Input Current	20A
Output Current Range	10-25 A
Maximum Cutting Thickness (Mild Steel)	3/8 in. (9.5 mm)
Gas Connection	1/4 in NPT
Gas Supply	Compressed air
Gas Pressure	65 psi (4.5 bar)
Input Voltage	115V
Rated Output	25A
Included Torch	PRO-CUT torch
Gas Flow Rate	127 l/min