DUAL AUTOMATIC TEMPERATURE CONTROL (DATC) SYSTEM
WITH HEATED AND COOLED SEATS (IF EQUIPPED)
Temperature conversion: To switch between Fahrenheit and Celsius,
refer to Message center in the Driver Controls chapter.
MAX A/C setting: In order to achieve maximum cooling performance,
press
, A/C, , and set the temperature to 60°F (16°C) and the
highest blower setting.
1.
Defrost: Distributes outside air through the windshield defroster
vents and demister vents. Can be used to clear the windshield of fog and
thin ice. The system will automatically provide outside air to reduce
window fogging. To exit defrost, select another distribution mode.
2. Passenger side temperature control: Press to increase/decrease
the temperature on the passenger side of the vehicle. Allows the
passenger to choose and control a different temperature than the driver,
if desired.
3.
R
Rear defroster: Press to activate/deactivate the rear window
defroster. Refer to the Rear window defroster section in this chapter for
more information.
4. DUAL zone selector: Press to engage/disengage separate passenger
side temperature control.
5.
Passenger heated seat: Press to control the passenger heated
seat. Refer to Heated and cooled seats in the Seating and Safety
Restraints chapter for more information.
2008 MKX (mkx)
Owners Guide (post-2002-fmt)
USA (fus)
Climate Controls
60
To Next Page
Loading...
Need help?
General
