Lincoln 2014 MKZ Quick Reference Guide

3 Service Engine Soon Light
Lights briefly when you switch on
the ignition. If it remains on or is blinking
after the engine is started, the On-Board
Diagnostics (OBD-II) system has detected
a malfunction. Drive in a moderate fashion
and contact your authorized dealer as
soon as possible.
4 Power Tilt/Telescoping
Steering Column*
Your power tilt steering column has a
4-way rocker control that allows you to
adjust the steering wheel to your
desired position.
5 Steering Wheel Controls
Press VOL +/– to increase/decrease
volume levels. Press SEEK
to
access the next/previous radio station
preset, CD track or preset satellite
radio channel*.
Press
to access SYNC®
phone features.
Press
to access voice recognition.
6 Right Vehicle Information Display
Displays information about Entertainment,
Phone, Climate and Navigation*. Use
the right, 5-way control located on your
steering wheel to scroll through,
highlight and make minor adjustments
within a selected menu. Refer to the
MyLincoln Touch
TM
chapter in your
Owner’s Manual for more information.
7 Push Button Start
Allows you to start your vehicle by
pressing the ENGINE START/STOP
control while fully pressing down on the
brake pedal. If your vehicle has been
idling for an extended period of time, it
will automatically shut down. Before the
engine shuts down, a message appears in
the information display, allowing the driver
to override the shutdown feature. Press
the control again to switch off the engine.
Note: Your intelligent access transmitter
must be inside the vehicle for the ignition
to start. Keyless warning alert sounds the
horn twice when you exit the vehicle with
the intelligent access transmitter and the
keyless vehicle is in RUN, indicating the
vehicle is still on.
8 Push Button Shift Transmission
Your vehicle includes an electronic
transmission. The shift controls are
on the center stack next to the
MyLincoln Touch system.
Putting Your Vehicle in Gear
1. Fully press down the brake pedal.
2. Press and release one of the PRNDS
controls to select your gear.
3. The selected gearshift control lights
and the information display shows a
telltale of the selected gear.
4. Release the brake pedal and your
transmission will remain in the
selected gear.
Note: When entering an automatic car
wash, always put your vehicle into Stay in
Neutral mode. To put your vehicle in Stay
in Neutral mode, make sure your vehicle
is stationary first, and then:
1. Press the neutral (N) control on
the shifter assembly once. The
information display screen will
read “Press N to enter Stay in
Neutral mode”.
2. Press neutral (N) on the shifter
assembly again. The message “Stay
in Neutral mode engaged” will
appear in the information display
and the neutral (N) control will flash
continuously to confirm your selection.
3. To exit Stay in Neutral mode,
press another gear.
5
*if equipped
Instrument Panel
2014 MKZ
1 Left Vehicle Information Display
Provides information about various
systems on your vehicle. Use the left,
5-way control located on the steering
wheel to choose and confirm settings
and messages. Refer to the Information
Displays chapter in your Owner’s Manual
for more information.
2 Adaptive Cruise Control*
Your MKZ includes cruise control or
adaptive cruise control. Adaptive cruise
control automatically adjusts your speed
to maintain a set distance between your
vehicle and the vehicle in front of you in
the same lane. You can set the gap
distance between your vehicle and the
vehicle in front of you by pressing the
and
controls on the steering wheel.
Note: Driving aids do not replace the
need to watch where the vehicle is
moving and brake where necessary.
Refer to the Cruise Control chapter
of your Owner’s Manual for safety
information, more details and limitations.
4
*if equipped

Lincoln 2014 MKZ Specifications

General

Brand	Lincoln
Model	2014 MKZ
Category	Automobile
Language	English