How to start Windows from SSD
1. First you should make sure that the SSD has been installed successfully.
2. You need to prepare a USB flash drive of 8G or more. (Because the size of the OS
files is more than 7GB)
PS: The SSD and the USB flash drive should be empty because when you fixing the
Windows into the SSD, the files in the laptop may lose.
Note: If you do not have such a USB flash drive, please refer to below link to move OS to
the SSD.
https://www.partitionwizard.com/help/migrate-os-to-ssd-hd.html
3. Then you should format the USB flash drive first. Insert your USB flash drive into a
laptop(Any laptop is OK), find your USB flash drive at “This PC”, and right click it, then
you can find “Format...” and click it:
4. Choose the “NTFS” and set the USB flash drive’s label as “WINPE” , then click
“Start” button. After formatting finished, click the “OK” button, and finally click the
“Close” button, then the USB flash drive is ready to use.
PS: You must follow this step strictly, or the SSD will not recognize the USB flash drive.
Don’t change the label “WINPE”.
To Next Page
Loading...
