Need help?Do you have a question about the Linder SPORTSMAN 445 Catch and is the answer not in the manual?
Details the boat's unique 14-digit identification number engraved in the hull for security.
Explains CE-marking for category C and safety approval by Det Norske Veritas.
Explains the meaning of Danger (D), Warning (W), and Caution (C) symbols used in the manual.
Details the physical dimensions and construction specifics of the boat.
Specifies maximum weight limits for the boat and maximum number of persons.
Outlines maximum engine power, recommended power, and maximum engine weight.
Provides details on outboard shaft length and maximum weight for trailer transport.
Identifies key electrical components like the main switch, battery, and power sockets.
Locates various hull fittings, access points, and storage areas.
Shows the location of fishing equipment holders, safety ladder, and anode.
Identifies steering cable, automatic bilge pump, and fuel tank compartment.
Covers engine requirements, kill cord use, and safe handling practices.
Advises on navigating safely, respecting speed restrictions, and traffic rules.
Details maximum load capacity, weight distribution, and passenger limits.
Covers pre-trip checks, man overboard, and safety equipment.
Explains how to operate the bilge pump manually or automatically.
Guides on resolving bilge pump issues and its operational limits.
Describes mooring points and rings for securing the boat.
Advises on fitting accessories and preventing galvanic corrosion.
Provides instructions for safely transporting the boat on a trailer.
Covers environmental impact, recycling, and regular service checks.
Details recommended methods for cleaning the boat's exterior.
Explains the purpose and replacement schedule for anodes.
Advises on preventing corrosion by avoiding contact with dissimilar metals.
Provides guidance on painting the hull and applying anti-fouling paint.
Recommends consulting dealers for repairs and warns against unauthorized modifications.
Offers advice on preparing the boat for winter storage, including battery care.
Explains the waterline marking related to maximum engine weight.
Describes the 12V electrical system, main switch, and battery location.
Provides essential care instructions for the battery and electrical components.
Presents a visual representation of the boat's electrical wiring.
Identifies the main switch, switch panel, and fuse panel components.
Details the craft's type, hull, propulsion, engine, deck, and CIN.
Lists manufacturer, notified body, and certification details.
Manufacturer's declaration that the craft complies with essential requirements.
Outlines the 3-year warranty covering production and material defects.
Lists standards and technical documentation related to the Small Craft Directive.
To Next Page
General
