Need help?Do you have a question about the LINDR AS-40 and is the answer not in the manual?
Do not use the equipment for purposes other than intended by the manufacturer.
Instructions on handling electrical connections, wet hands, and appliance plugs.
Coolers need ventilation, stable, dry, horizontal placement, and no obstructions.
Chiller must not be placed on its side, even during transport.
Connect the cooling machine to the dispense tower and heads, using recommended fittings.
Controls beverage temperature using a mechanical thermostat between 2°C and 8°C.
Steps to start the cooling unit after connecting the power cord and switching the main switch.
Instructions for firmly pushing the tube into the fitting for a secure connection.
Guide on how to disconnect tubes by pulling the gray ring, avoiding pressure.
Emphasizes disconnecting the machine from the main electrical supply before any work.
Details on connecting to 220-240V 50Hz, 16A fuse, and handling damaged cords.
Explanation of how electrical risks are removed through system construction according to norms.
Step-by-step guide for chemical sanitization using a sanitizing bottle and solution.
General| Brand | LINDR |
|---|---|
| Model | AS-40 |
| Category | Accessories |
| Language | English |
To Next Page
