LINDR Green Line new CWP 100

Need help?

Do you have a question about the LINDR Green Line new CWP 100 and is the answer not in the manual?

Summary

General Safety and Operational Guidelines

Safe Usage, Electrical Safety, and Handling

Covers proper use, electrical checks, power disconnection, and handling flammable coolant.

Airflow, Fan Safety, and Sanitation Precautions

Ensures airflow, fan safety, sanitation water temperature, and proper power disconnection.

Installation and Placement Requirements

Surface, Airflow, and Placement Restrictions

Requires stable surface, unobstructed airflow, and prohibits certain placement locations.

Tank Filling and Beverage Supply Setup

Beverage Supply Connections for AS Models

Beverage Supply Connections for CWP 200

Operation and Speed Fitting Usage

Operation Steps and Leakage Checks

Provides step-by-step operation guide and instructions for handling leakages.

Tap Installation and Temperature Control

Condenser Cleaning and Keg Coupler Assembly

Keg Tapping, Untapping, Spare Parts, and Sanitation

Keg Tapping and Untapping Procedures

Provides steps for tapping and untapping kegs using S and A system couplers.

Sanitation Setup and Procedure

Troubleshooting Common Malfunctions

Resolving Flow and Cooling Issues

Addresses no flow, insufficient cooling, and dispensing problems like spraying or foaming.

Resolving Compressor and Leakage Issues

Covers compressor not switching, leaks, and speed fitting leaks.

Service Contact and Information

Advises contacting service for persistent issues and lists required information.