How to fix no display on Lindsay GROWSMART IM3000 Measuring Instruments?
If your Lindsay Measuring Instruments display is blank, the most likely cause is a dead battery. You should replace the battery pack to resolve this.
Why is my Lindsay GROWSMART IM3000 Measuring Instruments reading jumpy?
A jumpy reading on your Lindsay Measuring Instruments can be caused by several factors: * Improper equalization: Check to ensure proper equalization. * Pulsing flow: Use an external power source, which allows for more flow averaging. * Rapidly changing conductivity (for chemigation applications): Install the meter upstream of the chemigation entry location, or far enough downstream to allow for thorough fluid mixing before the fluid reaches the meter.
What to do if flow rate reads zero when there is flow in Lindsay GROWSMART IM3000 Measuring Instruments?
If your Lindsay Measuring Instruments indicate a zero flow rate despite actual flow, there could be a couple of reasons: 1. The flow might be below the cutoff threshold. In this case, the reading will resume automatically once the flow increases. 2. There may be air trapped in the meter. Try repositioning the meter to ensure a full pipe situation.
General| Brand | Lindsay |
|---|---|
| Model | GROWSMART IM3000 |
| Category | Measuring Instruments |
| Language | English |
Explains different hazard levels and their corresponding panels (Danger, Warning, Caution, Notice).
Defines additional safety statements like ATTENTION and IMPORTANT for machine safety.
Describes the IM3000 flowmeter and lists available models based on pipe diameter.
Highlights the key features that distinguish the Growsmart IM3000 Magnetic Flowmeter.
Guidelines for shipping, transporting, and storing the flowmeter to prevent damage.
Details on materials, pressure ratings, operating temperature, enclosure ratings, and measurement ranges.
Instructions on orienting the meter and pipeline for accurate readings, avoiding air bubbles and sediment.
Guidelines for proper straight pipe, elbow, and pump distances for optimal meter performance.
Provides detailed physical dimensions and weights for various IM3000 models.
Explains the importance of grounding the meter, especially with plastic pipes, to prevent electrical shock.
Details wiring for power/output cables, BOSS, and VISION systems, including K-Factors.
Discusses managing vibrations and details external power and battery options for the flowmeter.
Step-by-step guide for replacing the internal battery pack of the IM3000 flowmeter.
Lists the 5 available output types and explains how to change display units using the reed switch.
Explains the flowmeter's LCD display, power status indicators, and warning messages.
Lists common problems, their causes, and solutions for the IM3000 flowmeter.
Lists available spare parts with their part numbers, descriptions, and contents.
Records the revision history of the manual, including date, revision, ECN, and description.
To Next Page