Lindy FireWire 800 User Manual

- 1 -
FireWire 800 3Ports PCI Host
1. Introduction
This FireWire800 3Ports PCI Host has IEEE P1394b / FireWire 800
2Ports and 1394a 1Port at PCI card to Transmit and Receive Data at 800/
400/ 200/ 100 Mbits/s. It provides a 32bit 33 MHz and 64bit 33MHz PCI
interface on the host side.
Apple Mac OS X v10.2.4 or newer support Built-in 800Mbps driver for this
card. Mac OS 8.6 – Mac X v10.2.3 just support Built-in 400Mbps driver for
this card.
1.1. Features
1.1.1. PCI Interface
= Compliant with PCI Specification, revision 2.2.
= Integrated PCI DMA engines.
= 32 bit/33MHz and 64 bit/33MHz fully compliant PCI host interface.
1.1.2. IEEE 1394 ( FireWire 800 /400 /200 /100 )
o On Board Power connector to have Extra power input from system
power supply
o Supports data transfer rate up to 800 Mbps
o Fully supports Provisions of IEEE P1394b Revision 1.33+
o Fully Supports Provisions of IEEE 1394a-2000 and 1394-1995
Standard
o One External 1394a-2000 Fully Compliant Cable Port at S400, S200,
S100 speed
o Two Bilingual (9-pin) Cable Ports at S800 or S400b speed
o Supports Plug and Play
1.2. Package Contents
= FireWire800 PCI card
= Y-type Power Cable
= This Users Manual

Lindy FireWire 800 Specifications

General

Data Transfer Rate	800 Mbps
Chipset	Texas Instruments XIO2213B
Compatibility	IEEE 1394b, IEEE 1394a
Operating System Support	Windows, macOS
Connector	9-pin

Summary

Introduction to FireWire 800 3Ports PCI Host

Product Features Overview

Details the general features of the FireWire 800 3Ports PCI Host, including its interface and compatibility.

PCI Interface Specifications

Describes compliance with PCI Specification revision 2.2 and integrated DMA engines for the host interface.

IEEE 1394 (FireWire) Standards and Speeds

Covers support for IEEE P1394b, 1394a, and 1995 standards, with data transfer rates up to 800 Mbps.

Package Contents

Lists the items included in the product package: FireWire800 PCI card, Y-type power cable, and user manual.

Installation Procedure

Step-by-Step Installation Guide

Outlines the process for installing the PCI board, including powering down, inserting the card, and connecting power.