Need help?Do you have a question about the Line 6 DIGITAL WIRELESS XD-V75 and is the answer not in the manual?
General| System Type | Digital Wireless |
|---|---|
| System Frequency Response | 20 Hz - 20 kHz |
| Simultaneous Channels | Up to 14 |
| Receiver Type | Diversity |
| Receiver Outputs | XLR, 1/4" |
| A/D Conversion | 24-bit |
| Dynamic Range | 120 dB |
| Transmitter Type | Handheld |
| Battery Type | AA |
| Frequency Range | 2.4 GHz ISM band |
| Microphone Capsule | Dynamic |
| Battery Life | 8 hours (alkaline), 12 hours (rechargeable) |
Introduction to the Line 6 XD-V75 Digital Wireless microphone system.
Essential safety guidelines, warnings, and regulatory compliance information.
Highlights the advanced features and operational advantages of the XD-V75 system.
Guidance on antenna placement, avoiding interference, and maximizing signal quality.
Initial setup steps for the XD-V75 receiver, including connections and power.
Instructions for powering on and configuring the TBP12 beltpack transmitter.
Instructions for powering on and configuring the THH12 handheld transmitter.
Explanation of the technical principles and benefits of digital wireless transmission.
Comprehensive guide for connecting, powering, and configuring the XD-V75 receiver.
Step-by-step instructions for setting up the THH12 handheld transmitter.
Step-by-step instructions for setting up the TBP12 beltpack transmitter.
How to connect the receiver to various audio equipment like mixers or amplifiers.
Information on interoperability with previous Line 6 wireless models.
Procedure to scan for available channels and detect potential RF interference.
Adjusting the audio signal output level from the receiver to the sound system.
Configuring the dynamic filter for optimizing speech or music audio quality.
Choosing microphone models on the THH12 for sound character emulation.
Selecting equalization models for the TBP12 beltpack transmitter's audio.
Assigning custom names to transmitters for easy identification on receiver displays.
Adjusting transmitter power output and locking buttons to prevent accidental changes.
Enabling and managing 24-bit encryption for secure audio transmission.
How to read and interpret battery life indicators on all system components.
Procedures for scanning channels, identifying interference, and using RF meters.
Performing venue walk-tests and strategies to mitigate WiFi interference.
Techniques to manage signal integrity issues caused by transmitter proximity.
Guidelines for mounting antennas and installing receivers in racks.
Best practices for positioning remote antennas for optimal coverage and range.
Solutions for common operational problems with the wireless system.
Instructions for updating the system's firmware using the USB port.
A chart detailing channel frequencies and their compatibility with WiFi bands.
Detailed technical specifications for the XD-V75 receiver and the overall system.
Technical details for transmitters and the TBP12 beltpack connector pinout.
To Next Page