Line 6 DT50 - User Manual

Tête mono avec une enceinte DT50 412
Branchez les câbles et réglez les commutateurs de la façon illustrée.
Mono-Top mit einer DT50 412
Schließe die Kabel die Schalter ein wie in der Abbildung gezeigt.
Mono-top met één DT50 412
Zie de illustratie voor het aansluiten van de kabels.
Cabezal mono con DT50 412 individual
Conecta los cables, como se muestra.
DT50412を１つ備えたモノ・ヘッド
イラストを参照してケーブルを接続します。
Mono Head with Single DT50 Four Twelve
Connect cables as shown in the illustration.
SPEAKER OUTPUTS
USE CLASS 2 WIRING ONLY
4 OHM OUT 8 OHM OUT 16 OHM OUT
Connect speakers to ONE
output only – A, B or C.
NEVER OPERATE WITHOUT
SPEAKERS CONNECTED.
(Use STANDBY to silence speakers.)
Use 8 OHM pair OR 4 OHM single Use 16 OHM pair OR 8 OHM single
B CA
N222
MADE IN CHI NA
DESIG NED IN U.S.A.

Summary

Mono Head with Single DT50 Four Twelve Connection

Speaker Output Configuration

Details on connecting to 4, 8, or 16 Ohm speaker outputs on a single DT50 412 cabinet.

Critical Safety Warning: Speaker Connection

Mandatory instruction to never operate the amplifier without speakers connected.

Mono Head with Dual DT50 Four Twelves Connection

Dual Speaker Output Configuration

Instructions for connecting a mono head to two DT50 412 cabinets using specified Ohm outputs.

Critical Safety Warning: Speaker Connection

Mandatory instruction to never operate the amplifier without speakers connected.

Line 6 DT50 Specifications

General

Brand	Line 6
Model	DT50
Category	Cables and connectors
Language	English