1. Antenna A & B Input Connectors (BNC) - You can connect to either
your front (
C & D) or rear (A & B) BNC connectors. Choose what works
best for your rack.
S/PDIF
IN
OUT
TUNER/
AUX OUT
ANTENNA A
ANTENNA B
OUT
IN
AES/EBU
MAIN OUT
This device complies with p art 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this d evice
must accept any interference received, including interference that may cause undesired operation.
Patent Pending Desigined in USA Made In China
SERIAL NUMBER
CAUTIO N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNIN G/AVIS:
SHOCK HAZARD – DO NOT OPEN. RISQUE DE CHOC ÉLECTRIQUE – NE PAS OUVRIR. TO REDUCE THE
RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. TO
REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
90 - 250V
~
50 - 60Hz
10 W Max.
A OUT B OUTA OUT B OUT
OR
CABLE
TONE
CHANNEL
SELECT
RFBATTERYAUDIO
MUTE
TRANSMITTER
STATUS
EXIT
SELECT
9. Antenna A/D & B/C Output Connectors (BNC) - Use the connectors
to daisy chain multiple Relay G90 receivers. The outputs can be for
Antenna A & B or C & D. It is user selectable which antennas get routed
to the outputs. Be sure each additional receiver and its transmitter are
set to a different channel.
10. Tuner/Aux Out - Use this output to connect to an external tuner or
into a second audio path. The
Tuner/Aux Out continues operation even
when the
Main Out is muted.
11. Main Out - Use the 1/4 inch output when connecting to an amplifier
or effects pedals. Use the balanced XLR output when connecting to
studio grade equipment that supports balanced XLR connections such
as mixing consoles.
To Next Page
Loading...
Need help?
General