Need help?Do you have a question about the Line 6 POD 2.0 and is the answer not in the manual?
General| Amp Models | 32 |
|---|---|
| Presets | 36 Factory, 36 User |
| A/D Resolution | 24-bit |
| D/A Resolution | 24-bit |
| Technology | Digital |
| Effects | 16 |
| Inputs | 1 x 1/4" Instrument |
| Outputs | 2 x 1/4" Stereo, 1 x 1/4" Headphone |
| MIDI | In/Out |
| Connectivity | MIDI |
| Power Supply | 9V DC (included) |
| Dimensions | 10.5 x 7.5 x 2.5 inches |
| Type | Guitar Amp Modeler and Effects Processor |
Provides step-by-step instructions for initial setup and operation of the device.
Details the process and benefits of registering your POD for warranty and updates.
Encourages users to visit the Line 6 website for resources and updates.
Describes the main controls like Power, Input, Output, Phones, and Left/Right Outputs.
Details A.I.R. Mode, Pedal, MIDI, Manual Button, and Channel selection.
Explains Amp Models, Drive, Tone Controls, Chan Vol, Reverb, Effect Tweak, Effects/Cabs, and Tuner.
Covers Noise Gate, Tap Tempo, and Save functionality.
Explains basic connections and initial setup for the device.
Covers studio setup, connections, A.I.R. mode, and signal routing for recording.
Covers placement, PA connection, and using POD as a preamp for live performance.
Details cabinet tuning, master volume, and adapting to external amps for live play.
Provides visual guides for connecting the POD in various live scenarios.
Discusses integrating stompboxes and using foot controllers for live performance.
Explains the modeling concept and lists available amp/cabinet types.
Provides descriptions for various amp models, covering pages 32-39.
Lists available cabinet simulations and their base models.
Introduces using MIDI editors for advanced effect parameter control.
Lists and briefly introduces the available effects on the POD.
Details effects like Tremolo, Chorus, Flanger, Rotary, and Delay.
Covers Compressor, Noise Gate, and various effect combinations.
Explains using Manual Mode and saving sounds to memory slots.
Covers sharing sounds and accessing online sound libraries.
Details editing presets, creating custom amp models/effects, and activating Custom Mode.
Explains how to restore factory default settings and warns about data loss.
Introduces the Floor Board, its connection, and operating modes.
Details Channel Select, banks, Manual Mode, editing, and saving with the Floor Board.
Covers Tap Tempo, Tuner, Wah Pedal, and Volume Pedal operations.
Explains controlling individual effects (Distortion, Drive/Boost, EQ, etc.) in this mode.
Basic operation of the FB4 foot controller.
Introduction to MIDI, connections, and channels.
Explains Program Change, Controller, and Sysex commands for MIDI communication.
Details transferring sounds and creating backups using MIDI.
Introduction and step-by-step guide to using the SoundDiver software.
Covers automating parameters, using MIDI controllers, and troubleshooting MIDI issues.
To Next Page
