Line 6 POD Studio UX2 User Manual

MIDI Setup Guide: MIDI Control Configuration
2•3
Customizing Controller Settings
To customize of any of the individual POD Studio/TonePort settings, launch the MIDI Control
Settings dialog from within the Line 6 Audio-MIDI Settings dialog:
To follow is an example of the MIDI Control Settings dialog, as displayed with a connected KB37
device. Note that if you have a UX2 or UX8, you’ll see only the switches & controllers offered by
those devices (Footswitch 1 & 2 for UX2 and Footswitch 1 &2 and Expression Pedal for UX8). See the
following descriptions for details on the fields within the MIDI Control Settings dialog.
The Switch/Controller column populates with all
assignable controllers for your device (KB37 shown here)
Name and save your custom
mappings as a preset
Choose which GearBox Control
function (if any) to assign to the
respective Switch/Controller
Choose the type of Control, which
CC/Action it will perform, and the
Switch Mode for each respective
Switch/Controller
Click Apply to commit
the displayed settings to
your device, then OK to
exit the dialog

Line 6 POD Studio UX2 Specifications

General

Brand	Line 6
Model	POD Studio UX2
Category	Music Equipment
Language	English