Line 6 SPIDER V Series User Manual

Global Settings and Wireless Channel Selection
1. Press and hold the HOME BUTTON to enter the Global Settings screen.
2. Turn the SELECT KNOB to scroll through the settings.
3. Press the SELECT KNOB to select a setting.
4. Turn the SELECT KNOB to modify the setting.
5. Press the SELECT KNOB again to return to scrolling the list.
6. Press the HOME BUTTON to exit.
GLOBAL SETTINGS OPTIONS
ITEM VALUES DESCRIPTION
Spider V 2.00.00 Displays the current Spider V rmware version
Wireless O, Auto, Manual The default is Auto, which allows Spider V to decide which is the optimal wireless channel. Set to Manual if you
wish to use a particular channel, which is helpful when using multiple Relay G10T wireless systems together to
avoid mixing up the channels
Channel 1 - 14 When Wireless is set to Auto, the optimal wireless channel is shown.
When set to Manual, this setting determines which channel is used
Wireless Rx 1.00.00 Displays the current rmware for the built-in wireless receiver
Looper Pos Pre, Post Selects the position of the built-in looper. In the Pre position, the loop is recorded unprocessed by your preset,
which can be helpful to audition presets. In the Post position, the loop is recorded as processed, for when it is
desired for the recorded loop have a “stationary” tone and then utilize a dierent preset for your live guitar
Knobs Relative, Absolute Determines whether or not the amp knobs utilize Relative control, which helps to avoid big jumps in value when
a knob's physical position does not match the preset value. When in Absolute mode, the knob's value will jump
immediately to that of the physical knob position when the knob is adjusted
TAP Light On, O Chooses whether the blinking TAP/Tempo button lights
Phones Mode Phone, Line When set to Phones, Spider V mutes the speakers when headphones are plugged in. When set to Line, the
speakers will NOT mute, and the level is no longer aected by the MASTER VOLUME knob. Using Line can be
helpful for recording or plugging into the PA, especially for Spider V 30/60 owners
Factory Reset Factory Reset Restores all Global Settings and presets to their factory default states
Tip: Use the Spider Remote app to backup your custom presets before performing a Factory Reset!

Line 6 SPIDER V Series Specifications

General

Effects	Yes
Number of Effects	100+
USB Audio Interface	Yes
Headphone Output	Yes
Aux Input	Yes
Built-in Tuner	Yes
Amplifier Type	Modeling
Presets	128
Connectivity	USB
Looper	Yes
Wireless Ready	Yes
Compatible Foot Controller	FBV 3
Inputs	1/4" Instrument, Aux In
Outputs	1 x 1/4" (headphones), 1 x 1/4" (line out)
Weight	Varies by model
Dimensions	Varies by model
Power Output	20W, 30W, 60W, 120W (depending on model)
Speaker Configuration	1x12" (depending on model)
Speaker Size	12" (depending on model)