Linear Access AK-11 - User Manual

Need help?

Do you have a question about the Linear Access AK-11 and is the answer not in the manual?

Summary

Instructions for mounting the AK-11 keypad onto a standard pedestal.

Guidelines for securely attaching the AK-11 keypad to a wall surface.

Wiring and connection instructions for installing the AK-11 for gate control.

Wiring and connection instructions for installing the AK-11 for door control.

Procedure to set the length (1-6 digits) for user entry codes.

Instructions for programming new entry codes and their associated relay actions.

How to change the primary 6-digit code used for programming.

Configures the function of the input terminal for door sense or inhibit.

Restores AK-11 to factory defaults, erasing all entry codes.

Procedure to reset the master programming code to default (123456).

General

Operating Voltage	12V DC
Number of Buttons	4
Engine Start	Yes
Engine Stop	Yes
Door Lock/Unlock	Yes
Trunk Release	Yes
Installation	Professional installation recommended
Security System	Built-in
Remote Control	2 remotes included
Battery	CR2032