19.
BILL GATE
BILL GATE
* ENTER NAME *
>
DELETE Y/N ?
* ENTER NAME *
ALL DELETE
Y/N ?
4) Move the cursor by using the <RIGHT> key (
)or
< LEFT> key (
) , type in a new letter, e.g. move the
cursor
to
<O>
and
type
in
<A>,
press
<CLEAR>
to
delete the <O>. Then press <ENTER> to store the edited information.
d. DELETE THE DATA
1) Press <DATABANK> to enter into the DATABANK mode.
2)
For
delete
one
data,
press
<P
AGE
DOWN>
key
(
)
to
search the require name, e.g. display shows:
3) Press <CLEAR>, display shows:
4) Answer by pressing either <Y> for YES or<N> for NO, after which the Translator will
return to the databank mode.
5) To delete all the data inside the databank, when the
display show:
6) Press <CLEAR>, display shows:
7) Press <Y> for YES to delete all data inside, or press <N> for NO, after which the
Translator will return to the databank mode.
To Next Page
Loading...