Lingo TR-800A - USING THE CALCULATOR

20.
G. USING THE CALCULATOR
You can use the Translator to do standard arithmetic calculations, memory
calculation and percent calculations. It calculates up to 10 digits.
1. Press <CALCULATOR> to go into the calculator mode,
display shows:
2. Standard calculation,+,-,x,
- .
3. Memory calculation:
(M+) to total a calculation and add the total to memory.
(M-) to total a calculation and subtract the total from the value in memory.
(MR) to recall or display the value in memory.
(MC) to clear the memory.
4. <CLEAR>:
(CE) To clear display.
(AC) To clear all calculation memory.
:
CALCULATOR
0