Link-One L1-RW332 - Installation and Setup Guide; Physical Installation

Wireless N300 Home Router
.
7
Chapter 2 Install Guide
1 Physical Installation
1.1 Preparation
Before connecting network lines, please verify the following items:
Item
Description
Wireless Router
Used with the provided power supply.
PC
Installed with IE8 or other better web browsers.
Ethernet Cable
Used for linking the PC to the router.
Broadband Service
Provided by ISP.
Internet Connection
Setup
 If you connect to the Internet using a
broadband connection that requires a username and
a password provided by your ISP, please select
PPPoE;
 If your ISP provides all the needed information:
IP address, subnet mask, gateway address, and
DNS address(es), please select Static IP;
 If you can access Internet as soon as your
computer directly connects to an Internet-enabled
ADSL/Cable modem, please select DHCP;
 If your ISP uses a PPTP connection, please
select PPTP;
 If your ISP uses an L2TP connection, please
select L2TP;
 PPPoE Dual Access (only supported in special
Area e.g.Russia.).
1.2 Physical Installation
1. Connect one end of the included power adapter to the device and plug
the other end into a wall outlet nearby. (Using a power adapter with a
different voltage rating than the one included with the device will cause