Link2Home EM-SL700B - User Manual

LED Solar Sensor Light EM-SL700B
Introduction .
We congratulate you on the purchase of your LED Solar Sensor Light. You have chosen a high quality
product. The instructions for use are part of the product. They contain important information concerning
safety, use. Before using the product, please familiarize yourself with all of the safety information and
instructions for use. Only use the product as described and for the specified applications. If you pass the
product on to anyone else, please ensure that you also pass on all the documentation with it.
The product is intended to illuminate outdoor areas for private use and is not suitable for commercial
use or for use in other applications.
Technical Data
Material: Aluminum + PC+ABS
LED Type: 10*3030
Battery: 7.4V, 1800mA (included)
Solar Panel 12V 300mA 3.5W, size 150*200mm
Motion sensor angle: 140º
Detection range: approx. 8-12m
Time setting: approx. 3seconds to 7min (+/-10%)
Lumen: 900LM (+/-10%)
Protection type: IP44 (splash-proof)
General safety instructions .
1. Children should not be allowed to play with the product. Cleaning and user maintenance should not
be performed by children without supervision.
2. Never leave children unsupervised with the packaging material. The packaging material represents a
danger of suffocation.
3. Do not use this product if you notice any damage
4. The illuminants are not replaceable. If the illuminants fail at the end of their lives, the entire product
must be replaced
Function
During twilight or darkness, once motion detector detects infrared radiation that is given off by people
passing by, the LED light is switched on.
User can turn the rotary control TIME to adjust the duration of the illumination from approx. 3 seconds to
7 minutes (+/-10%).
User can turn the rotary control LUX to adjust the daylight level at which to activate the motion detector.
Note: Once the light is activated by the motion detector, any subsequent detection will restart the timed
period again from the beginning.
Note: The motion detector responds to heat radiation. When outdoor temperatures are low, it is more
sensitive to body heat than when outdoor temperatures are warm.
Note: If the light is not activating in nighttime, probably it is affected by the street light, house light or

Summary

Introduction

Technical Data

General Safety Instructions

Function

Installation

LED Light Installation

Steps for mounting and positioning the LED light unit for optimal illumination.

Solar Panel Installation

Guidance on mounting and orienting the solar panel for maximum sun exposure.

Cleaning and Care

Troubleshooting

Disposal

Link2Home EM-SL700B Specifications