Instruction Manual
Remote control
Item no. Receiver RF201R-UL and Transmitter RF201T1
A. Functions
1. Learning code system
2. Manual button on each receiver for ON/OFF control.
3. All ON/All OFF control
4. Countdown function with 1, 2, 3, 4 hours
5. Random function for security use
B. Diagram
Switch ON/OFF all the paired receivers
Switch ON/OFF the paired receiver
Press the button from 1-4 hours, the paired receivers will switch
off after the set countdown time
Press the button, the paired receivers will enter the random
mode, switch ON/OFF randomly
Switch ON/OFF the receiver;
press over 3 seconds on transmitter to pair with selected receiver
or delete paired transmitters.
LED ON/OFF indicates receiver power ON/OFF; LED flashes
means receiver is under pairing mode; indicator countdown hours
To Next Page
Need help?
General