Linkskey LKS-SG5P User Manual

Linkskey LKS-SG5P Specifications

General

Brand	Linkskey
Model	LKS-SG5P
Category	Switch
Language	English

Summary

Introduction to Gigabit Ethernet Switch

Key Features of the Gigabit Ethernet Switch

Power Saving Features

Highlights power saving capabilities for link-on, link-down, and energy-efficient Ethernet.

Network Standards Compliance

Details compliance with IEEE half/full-duplex and auto-negotiation standards.

Performance and Forwarding

Describes non-blocking wire-speed forwarding and flow control support.

Auto-MDI/MDI-X and MAC Address Handling

Covers auto-MDI/MDI-X support and MAC address auto-learning.

Design and Configuration

Mentions compact design for mounting and plug-and-play setup.

Hardware Installation Guide

Connect Power Adapter

Connect the AC power adapter to the switch and a power outlet.

Connect Ethernet Cable

Connect a computer to an available Ethernet port on the switch.

LED Indicators Explained

Power LED Status

Explains the status of the Power LED: green for on, off when unlit.

Link/Act LED Status

Details Link/Act LED for port speed (10/100Mbps green, 1000Mbps orange) and activity.

Regulatory Compliance

FCC Warning

Details FCC regulations compliance for Class B digital devices and potential interference.

CE Mark Warning

Notes Class B product status and potential radio interference in domestic environments.