Model No.
Product Data
Model No.
Linksys
A Division of Cisco Systems, Inc.
18582 Teller Avenue
Irvine, CA 92612 USA
E-mail: sales@linksys.com
support@linksys.com
Web: http://www.linksys.com
Linksys products are available in more than 50
countries, supported by 12 Linksys Regional Offices
throughout the world. For a complete list of local
Linksys Sales and Technical Support contacts, visit
our Worldwide Web Site at www.linksys.com.
AS1SMA
Package Contents
• One Antenna Stand for
SMA Connectors
• Wall Mount screws
Works With:
•WRV54G
• WMP54GS
• WMP54G
• WET54G
• WET54GS5
• HGA7S (High Gain Antenna)
Specifications
Model Number AS1SMA
Connector one reverse SMA, one SMA
Cable Length 6 feet (152.4mm)
Environmental
Dimensions 7.87" x 1.81" x 2.80"
W x H x D (200 mm x 46 mm x 71 mm)
Unit Weight 7.58 oz. (0.22 kg)
Operating Temp. -4ºF to 149ºF (-20ºC to 65ºC)
Storage Temp. -22ºF to 167ºF (-30ºC to 75ºC)
Operating Humidity 0% to 85% Non-Condensing
AS1SMA-DS-40713NC KL
Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2004
Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.
Antenna Stand for SMA Connectors
Features
• Relocate your Wireless-B or Wire-
less-G antennas to avoid obsta-
cles and improve signal strength
• Easy to install and use, no config-
uration necessary
• 3-years limited warranty
To Previous Page
Loading...