Linksys WRT610N V2 User Manual

Thank you for purchasing the 6dBi Antenna Mod Kit for your Linksys router. First we will show you how
to install the antennas for your router. Next we will provide you with a tool that will help test the
performance of your newly modified router.
WRT610N V2 Antenna Installation Instructions:
1. No soldering required
2. Open the unit. You can use a torque wrench (size T10) or the sharp end of a kitchen knife will
work(we don’t recommend this).
3. Remove the UFL antenna connectors.

Linksys WRT610N V2 Specifications

General

Brand	Linksys
Model	WRT610N V2
Category	Antenna
Language	English

Summary

Linksys WRT610N V2 Antenna Mod Kit Installation

Initial Setup and Tools

Overview of the mod kit and required tools for router antenna installation.

UFL Connector Handling and Practice

Instructions on detaching, practicing, and attaching UFL antenna connectors.

Drilling and RP-SMA Adapter Installation

Steps for drilling holes and installing RP-SMA adapters on the router case.

Final Assembly and Antenna Attachment

Connecting new antennas and reassembling the router, including cable management.

Post-Modification Performance Testing

WIFI Radar Scanner Usage

Using the WIFI Radar Scanner to measure and compare signal strength.