EtherFast Cable/DSL Routers
7. Windows will notify you that it has completed copying the driver files to
your PC. Click Finish.
8. Windows will ask you if you want to restart your PC. Click Yes so your
new installation will take effect.
If it does not ask you, go to Start, Shut Down, then select Restart and
click Ye s .
Your USB installation is now complete.
Go to page 33 to configure your network
to work with the Router.
24
Instant Broadband Series
5. A new window will appear, saying that Windows is now ready to install
the best driver for this device. Click Next to continue.
6. Windows will begin copying the files to your PC. Do not click Cancel or
press the Esc key during this process.
If Windows asks for your Windows operating system files before copying,
direct your PC to the location of those files, e.g,
c:\windows\options\cabs, or D:\Win98 (assuming that your
CD-ROM drive is named D).
23
To Next Page
Loading...
Need help?
General
