EtherFast
®
Cable/DSL Routers
7. Windows will display a message notifying you that it has finished installing
the driver files on your PC. Click the Finish button to complete the USB
driver installation.
8. Go to the Start button, and select the Settings option. Then select the
Network and Dial-up Connections option, and click the Local Area
Connection icon. Click the Properties button to display the screen below.
Highlight Internet Protocol (TCP/IP) as shown below, and click on the
Properties button. Make sure that TCP/IP is set to Obtain an IP Address
Automatically.
Your USB installation is now complete.
Go to “Chapter 7: Configuring Your Network with the Cable/DSL Router.”
29
Instant Broadband
™
Series
5. When the Digital Signature Not Found screen appears, Windows will ask
you if you want to continue with the installation. Click the Ye s button.
6. Click the Next button for Windows to copy the driver files to your PC.
28
Figure 6-13
Figure 6-14
Figure 6-15
Figure 6-16
To Next Page
Loading...
