8820-02404 Rev. A00
Power on any routers or PCs that were powered off in Step .
5
CM3008
CM306/CM3024
Open a web browser and verify Internet access. This is where you will need
the information from Step 1 (account number of your broadband service,
phone number and new cable modem device identifiers). Some service
providers have additional setup steps that will automatically appear in the
browser. Follow the steps if necessary or call your Internet service provider if
you are unable to get online.
Step 3 - Activation
Once the CM3008 is ready the Ethernet, Status and Power LEDs will be solid.
Once the CM306/CM3024 is ready all of the LEDs on the front panel will
be solid.
• You can connect to the Internet wirelessly via your router or the wired
connection between your computer and the modem.
6
Reset Button
Power LED
Status LED
Send LED
Receive LED
Ethernet LED
Receive LED
Send LED
Ethernet LED
Status LED
Power LED