Linksys EA6350 User Manual

8
Troubleshooting
Linksys EA-Series
8
This chapter can help you solve common setup issues and connect to the
Internet. You can find more help from our award-winning customer support at
linksys.com/support.
Your router was not successfully set up
If Linksys Smart Wi-Fi did not complete the setup, you can try the
following:
• Press and hold the Reset button on your router with a paperclip or pin
until the LED starts blinking (about 10 seconds), then install the router
again.
Your router’s appearance may vary
• Temporarily disable your computer’s firewall (see the security software’s
instructions for help), and install the router again.
• If you have another computer, use that computer to install the router
again.
Windows XP Service Pack update
On Windows XP computers, Linksys Smart Wi-Fi requires Service Pack 3. If the
currently installed Service Pack is older than version 3, you need to download
and install Service Pack 3.
TIP
To temporarily connect to the Internet and download the required
Service Pack, you can use the included Ethernet cable to connect
your computer directly to your modem.
To install Service Pack 3:
1. Connect to the Microsoft Update website (update.microsoft.com/
windowsupdate).
2. Follow the instructions on the website or contact Microsoft if you need
further help.
3. After downloading and installing Service Pack 3, install the router again.
Troubleshooting

Linksys EA6350 Specifications

General

Color	black
Band Technology	dual
Frequency Band	2.4 ghz, 5.0 ghz
Ethernet Standard	10/100
Wireless Standard	ac
Gigabit Ethernet Speed	yes
Antennas	2
Parental Control	yes
Firewall	other
Data Encryption	yes
Encryption Type	wpa2
Ports	rj-45
Built In Modem	yes
System Requirements	pc: windows xp with service pack 3, vista with service pack 1 or later, 7 or 8; mac: os x leopard v10.5.8 or later, snow leopard v10.6.1 or later, lion v10.7 or mountain lion v10.8; wi-fi capability; cd or dvd drive

Weight and Dimensions

Height	9.1 inches
Width	12.6 inches
Net Weight	2 pounds