Linksys EA8300 Quick Start Guide

17
Troubleshooting
You can find more help from our award-winning customer support at linksys.com/support/EA8300.
Your router was not successfully set up
If Linksys Smart Wi-Fi did not complete the setup, you can try the following:
•
Press and hold the Reset button on your router with a paperclip or pin until the illuminated
Linksys logo turns off and the blue MU-MIMO indicators start blinking (about 10 seconds).
Install the router again.
•
Temporarily disable your computer’s firewall (see the security software’s instructions for
help). Install the router again.
•
If you have another computer, use that computer to install the router again.

Linksys EA8300 Specifications

General

Processor	716 MHz Quad-Core
USB Ports	1x USB 3.0
Beamforming	Yes
MU-MIMO	Yes
Wireless Standards	802.11a/b/g/n/ac
RAM	256 MB
Flash Memory	256 MB
Wi-Fi Technology	Tri-Band
Ethernet Ports	1 x Gigabit WAN, 4 x Gigabit LAN
Antennas	4 external antennas
Wireless Speed	AC2200 (400 + 867 + 867 Mbps)
Frequency Band	2.4 GHz, 5 GHz
Security	WPA2