(5) Power port—Connect the included AC power adapter.
(6) USB 2.0 port—Connect and share a USB drive or USB printer on your network or on the Internet.
(7) Wi-Fi Protected Setup™ button—Press to configure wireless security on Wi-Fi Protected Setup-
enabled network devices.
(8) Reset button—Press and hold for until the power LED starts flashing to reset the router to factory
settings. You can also restore the factory settings using Linksys Smart Wi-Fi on the Internet or mobile
app.
(9) Power switch—Press | (on) to turn on the router.
5
To Next Page
Loading...
