10
Installation
Review the new settings. If they
are correct, click Save. If you would
like to change them, click Back to
return to the previous screen.
To confirm that you want to format
your drives and erase all data on
them, click Next.
WARNING: Before you format
drive(s), back up pre-existing
data because all data on
your drive(s) will be erased
when they are formatted.
NOTE: When formatting is complete, the Network Storage System
is congured. You can map it to computers or use the Network
Storage System without mapping.
The following steps map the
network drive(s) to your computer
for convenient access.
Click Set up Computer.
P.
Q.
R.
Confirm New SettingsConfirm New Settings
Confirm FormattingConfirm Formatting
Set up ComputerSet up Computer
To Next Page
Loading...
