Need help?Do you have a question about the Linksys NSS4000 Series and is the answer not in the manual?
Set the NSS hostname and domain membership for network identity.
Guide to selecting appropriate RAID levels based on performance and reliability needs.
Step-by-step process for creating new RAID arrays from installed disks.
Add new disks to existing RAID arrays for expansion or redundancy.
Remove a RAID array, releasing disks and deleting associated data.
Aggregate and manage storage from multiple NSS units into logical units.
Make local storage available for export to other NSS units on the network.
Create virtualized storage by combining exported disks into a JBOD.
Create a new volume on a RAID array to partition storage space.
Increase the size of an existing volume if space is available on the array.
Remove a volume, deleting all associated shares and data.
Configure the NSS to capture data snapshots at specified frequencies.
Manually lock an encrypted volume to enhance security by preventing access.
Unlock an encrypted volume that has been locked, making data accessible.
Change the password for an encrypted volume to maintain security.
Adjust RAID rebuild priority to balance system performance and rebuild speed.
Create, view, and manage local and domain user accounts for NSS access.
Set up new user profiles, assigning primary groups and home directories.
Create new user groups to manage access privileges for multiple users.
Set storage space limits for users and groups on NSS volumes.
Define specific storage quotas for users or groups on volumes.
Add new network filters based on IP/MAC addresses or ranges to control access.
Create new file shares that users can access on the NSS.
Configure automatic backups for shares at specified time intervals.
Procedures for safely rebooting or shutting down the NSS system.
Steps to download and install the latest firmware for the NSS.
Reset NSS configuration settings to factory defaults, preserving or clearing storage data.
Create a backup copy of the current NSS configuration settings.
Restore NSS settings from a previously saved configuration file.
Change the administrator password for enhanced security.
Access CIFS shares with administrator credentials for full read-write access.
Guide for UNIX/Linux users to access NSS storage via NFS.
Replace a failed disk and repair a degraded RAID array.
Procedures for handling and recovering from a failed RAID array.
To Next Page
General