Linksys NSS4000 Series

139
Chapter 7: Admin
Changing the Administrator Password
Network Storage System (NSS) Administrator Guide
Chapter
7
Changing the Administrator Password
You should change the administrator password from the default to ensure that only authorized
individuals can access the NSS configuration interface. If you forget the administrator password, you
can only reset it by pressing the Reset button on the NSS chassis and restoring the factory defaults.
The default password is "admin".
To set up the administrator password:
1. From the Manager Menu, click Admin  Password.
The Admin Password Configuration page appears.
2. Enter the current password in the Current Password field.
3. Enter the new password in the New Password field.
4. Re-enter the new password in the Confirm Password field.
5. Click Update.
The new password is in effect immediately. The next configuration interface page that you
access will prompt you for the new password.