22
Chapter 3: Network
Allowing a VLAN Access to the NSS
Network Storage System (NSS) Administrator Guide
Chapter
3
Allowing a VLAN Access to the NSS
To set up a network VLAN to access the NSS:
1. From the Manager Menu, click Network VLAN.
The VLAN Configuration page appears.
2. In the New VLAN area of the page, set up the following fields:
• Link: Select the Ethernet link on which you want the VLAN to connect to the NSS. Available
options depend on the configuration of your Ethernet link(s).
• VLAN: Enter the ID of the VLAN as it is defined within your network. The range of valid VLAN
IDs is from 0 to 4095.
• Priority: Select the QoS priority for the VLAN traffic as it is defined for your network. Valid
options range from 0 to 7 (as defined by the IEEE 802.1p standard). VLAN Ethernet frames
contain a three-bit priority tag ranging from 0 to 7 (where 0 is best effort and 7 is network-
critical traffic).
To Next Page
Loading...