96
Chapter 5: Access
Network Filters Overview
Network Storage System (NSS) Administrator Guide
Chapter
5
Network Filters Overview
In addition to providing storage for your data, the NSS provides a configurable firewall to protect
that data. Defining network filters lets you specify which network hosts have access to the NSS via the
various supported protocols.
To view the network filters:
1. From the Manager Menu, click Access Network.
The Network Filters page appears.
2. You can do any of the following:
• Set the default network policy (see Defining the Default Network Policy) to control what
happens to traffic not explicitly covered by defined filters.
• View or delete the existing filters (see Network Filters Overview) defined for the NSS from the
Active Network Access Filters table.
• Create a new filter (see Creating a Network Filter) based on an IP or MAC address or a
range of IP addresses.
To Next Page
Loading...