On the PLW400, press and hold the Wi-Fi Protected Setup
TM
button for at least one
(1) second, until the Wi-Fi Protected Setup
TM
LED flashes.
Step 3:
Within two (2) minutes, press the Wi-Fi Protected Setup
TM
button on your wireless
router. The PLW400 retrieves the security settings from the router and connects to your wireless
network.
NOTE: It is important to check your router’s wireless settings on the web-based based setup
page as the previous settings of your router may change once you press the Wi-Fi Protected
Setup
TM
button.
To Next Page
Loading...