Need help?Do you have a question about the Linksys PSUS4 and is the answer not in the manual?
Describes the ports and buttons located on the rear of the USB PrintServer, including LAN ports and the USB port.
Step-by-step instructions for physically connecting the PrintServer to the network and printer using cables.
Provides step-by-step instructions for installing the PrintServer driver on Windows, including driver and port configuration.
Explains how to configure TCP/IP settings like IP address, subnet mask, and gateway for network communication.
Introduces the Bi-Admin utility for managing the PrintServer's internal settings, status, and diagnostics.
Provides step-by-step instructions for installing the Bi-Admin management utility software on a computer.
Covers the main configuration settings within Bi-Admin, including System, TCP/IP, AppleTalk, NetBEUI, Internet Printing, and Port tabs.
Provides solutions for common issues encountered during PrintServer installation and operation, such as LED status and connectivity problems.
General| Device Type | Print Server |
|---|---|
| Model | PSUS4 |
| Manufacturer | Linksys |
| Connectivity Technology | Wired |
| Data Link Protocol | Ethernet |
| Compliant Standards | IEEE 802.3 |
| Network Interface | Ethernet |
| Supported Protocols | TCP/IP, IPX/SPX |
| Power Supply | External |
| Features | Auto-sensing |
| Compatibility | Mac |
| Ports | 1 x parallel |
To Next Page
