EasyManuals Logo

Linksys RTP300 Product Data

Linksys RTP300
2 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Product Data
Model No.
Features
Four 10/100 BaseT Ethernet Ports to share
Internet Connection
Two RJ11 voice ports for analog phones or
fax machines with two independent tele-
phone numbers
Support QoS (Quality of Service) to ensure
best quality voice
Supports Access Control to block specific
PC's on the network from gaining access to
the Internet
Supports SPI Firewall to limit the risk of intru-
sion attempts
Web-based configuration through a built-in
web server
"Supports High speed Internet Connection
for FTTH Deployments
Supports auto-provisioning with provisioning
servers for configuration and upgrades
Supports Session Initiation Protocol (SIP)
Supports DTMF tone detection and genera-
tion
Supports Voice Activity Detection (VAD) and
Silence Suppression
Supports Comfort Noise Generation (CNG)
Supports Caller ID generation and detecting
(FSK and DTMF)
Supports Echo Cancellation (G.165 and
G.168)
Supports T.38 Fax Really including V.17, V.21,
V.27ter and V.29 and FAX Pass-through
(PCM)
Supports multiple voice compression G.711,
G.726, G.729, G.723.1
Linksys
A Division of Cisco Systems, Inc.
121 Theory Drive
Irvine, CA 92617 USA
E-mail: sales@linksys.com
support@linksys.com
Web: http://www.linksys.com
Linksys products are available in more than 50
countries, supported by 12 Linksys Regional Offices
throughout the world. For a complete list of local
Linksys Sales and Technical Support contacts, visit
our Worldwide Web Site at www.linksys.com.
RTP300
with 2 Phone Ports
Broadband Router
Specifications
Model Number RTP300
Standards IEEE 802.3 (10BaseT), IEEE 802.3u (100BaseTX)
Ports/Buttons One 10/100 RJ-45 Internet Port, Four 10/100 RJ-45 Network
Ports, Two Standard Phone Ports, One Power Port, Rest Button
Cabling Type RJ45 Ethernet Category 5, RJ11 Standard Phone cable
LEDs INTERNET, PHONE2, PHONE1, ETHERNET(1-4), POWER
UPnP able/cert Certified
Network Protocols TCP/IP
Voice Protocols Session Initiation Protocol (SIP v2)
Voice Codec’s G.711 a-law, G.711µ-Law, G.726, G.729 A/B/E, and G.723.1
Ringer equivalence
number (REN) 5 REN per RJ-11 port
FXS Port Impedance 600 ohm resistive or 270 ohm
+ 750ohm/150nF complex impedance
Ring Frequency 25 Hz
Ring Voltage 40 - 50 Vrms
Warranty 1 year
Environmental
Dimensions 170 mm x 170 mm x 31 mm
(W x D x H) (6.69" x 6.69" x 1.22")
Unit Weight 12.20 oz. (0.346 kg)
Power Input External, 12V DC, 1.0A
Certifications FCC, CE, cUL
Operating Temp. 32ºF to 104ºF (0ºC to 40ºC)
Storage Temp. -4ºF to 140ºF (-20ºC to 60ºC)
Operating Humidity 10% to 85%, Non-Condensing
Storage Humidity 5% to 90%, Non-Condensing
RTP300-NA-DS-60814-NC LH
Package Contents
Broadband Router with 2 Phone Ports
Power Adapter
•Network Cable
Setup CD with Installation Guide
Minimum Requirements
High-speed internet connection (cable/DSL/other)
Activated Internet Phone Service
Regular analog touch-tone telephone or FAX
machine for Voice Service
Internet Explorer 5.0 or Netscape 6
CD-ROM Drive
Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2006
Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.

Other manuals for Linksys RTP300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Linksys RTP300 and is the answer not in the manual?

Linksys RTP300 Specifications

General IconGeneral
BrandLinksys
ModelRTP300
CategoryWireless Router
LanguageEnglish

Related product manuals